Opens in a new tab

Chip Tuning Cables

Browse chip tuning cables for compatible vehicle tuning interfaces and control units. Cable type, connector and supported application vary, so confirm the product matches your equipment and vehicle before ordering. Check each listing for compatibility information and any related requirements for your calibration setup.

Showing all 10 results

  • T90Aextensioncable
    Extension Clamp Cable for Tornado90000 T90A

    The Extension Clamp Cable for Topdon Tornado90000 (T90A) adds 3 metres of reach via AWG4 copper wiring. Maintains minimal voltage drop and full current stability at 90A — supporting ECU programming and battery recovery in Supply Mode without performance compromise, and improving technician positioning flexibility in the workshop.

     

    €99.99 ex VAT
  • DFOX BMW MDG1 Bench Cable
    DFOX BMW MDG1 Bench Cable

    The professional standard for modern BMW tuning. This dedicated BMW MDG1 Bench Cable is engineered for Bosch MD1CS001, MD1CP002, MG1CS003, and MG1CS201 ECUs found in F-Series and G-Series BMWs. Specifically designed for use with the DFOX / DFB Technology tool, it provides a secure, plug-and-play interface for high-speed reading and writing. Skip the manual pin-outs…

    €99.99 ex VAT
  • MD1CP001 MB Bench Universal Cable
    MD1CS003 PSA Bench Cable 1.5m

    The essential link for modern 1.5 BlueHDi engines. This premium MD1CS003 Bench Cable is purpose-built for Bosch ECUs found in Peugeot, Citroën, DS, and Opel models equipped with the DV5RE/DV5RD/DV5RC engines. Compatible with Autotuner, KESS3, Flex, and FoxFlash, it enables high-speed “Bench Mode” reading and writing without opening the ECU. At 1.5m in length, it…

    €130.00 ex VAT
  • CTS Universal ECU Breakout Cable
    CTS – Universal ECU Breakout Cable

    The ultimate “Swiss Army Knife” for ECU bench work. This upgraded Universal Breakout Cable features an expanded array of pin types and connectors to support a massive variety of Engine Control Units. Equipped with a Female OBD2 port, built-in CAN bus termination resistors (60Ω/120Ω), and specialized bootpins, it allows you to power up and communicate…

    €129.99 ex VAT
  • EDC17C60 PSA Bench Cable 1.5m
    EDC17C60 PSA Bench Cable 1.5m

    The precision standard for BlueHDi tuning. This 1.5m EDC17C60 Bench Cable is purpose-built for Bosch ECUs found in Peugeot, Citroën, DS, and Opel 1.6L BlueHDi models. Compatible with Autotuner, KESS3, Flex, BFlash, and DFOX, it allows for fast, stable reading, writing, and cloning. Eliminate the risk of bent pins and save significant setup time with…

    €130.00 ex VAT
  • MD1CP001 MB Bench Universal Cable
    MD1CP001 MB Bench Universal Cable

    The professional link for modern Mercedes diesels. This premium MD1CP001 Bench Cable is engineered for Bosch MD1 engine control units found in Euro 6d Mercedes-Benz models (OM654 and OM656 engines). Compatible with Autotuner, KESS3, Flex, and bFlash, it provides a secure, “plug-and-play” interface for high-speed reading, writing, and cloning. Featuring a 1.5m length and clearly…

    €125.00 ex VAT
  • Mercedes ACM 2.1 Bench Cable
    Mercedes ACM 2.1 Bench Cable

    The precision tool for Mercedes emissions control. This heavy-duty bench cable is engineered for the Continental/Temic ACM 2.1 modules found in Euro 6 Actros, Arocs, Antos, and Atego trucks. Compatible with leading tuning tools like KESS3, Autotuner, Flex, and DFOX, it provides a secure “plug-and-play” interface for reading, writing, and cloning. Perfect for troubleshooting AdBlue/DEF…

    €120.00 ex VAT
  • Mercedes MCM 2.1 Bench Cable
    Mercedes MCM 2.1 Bench Cable

    The professional’s gateway to Mercedes Truck remapping. This premium bench cable is purpose-built for Continental MCM 2.1 engine control units found in Euro 6 Mercedes-Benz Actros, Arocs, and Antos models. Compatible with industry-leading tools like KESS3, Autotuner, Flex, and FoxFlash, it enables fast and safe “Bench Mode” access for performance tuning and module cloning. Eliminate…

    €110.00 ex VAT
  • Scania Continental EMS S8
    Scania Continental EMS S8

    The professional standard for Scania ECU tuning. This heavy-duty bench cable is engineered specifically for Scania Continental EMS S8 (and is often compatible with S6/S7) controllers found in Euro 5 and Euro 6 trucks. Compatible with KESS3, Autotuner, Flex, and FoxFlash, it enables high-speed reading, writing, and full cloning on the workbench. Avoid the risk…

    €105.00 ex VAT
  • Volvo Renault TRW EMS 2 x Bench
    Volvo Renault TRW EMS 2 x Bench

    The ultimate time-saver for truck remapping. This heavy-duty bench cable is specifically designed for TRW EMS 2.2, 2.3, and 2.4 control units used in Volvo and Renault trucks. Compatible with leading programmers like Autotuner, FoxFlash, and KT200, it provides a stable, plug-and-play connection for reading, writing, and cloning. Eliminate the risk of bent pins and…

    €210.00 ex VAT
Verified by MonsterInsights